Protector XStream Laboratory Hoods - MILLIPORE ALTERNATIVE
Millipore-Alternative.com
High Quality Science Products Without The Attitude
An APSWATER Micro-Website™
A US Government Supplier DUNS 787700418

Rated "A+" with the BBB
29 years, Zero Complaints
Click here to see our record
We are open and ready to help during this health crisis
Call us at 818-786-0600 or write us at public@apswater.com

Protector XStream Laboratory Hoods

Protector XStream Laboratory Hoods
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the mannequin. In all scenarios, the Protector XStream allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory, the ability of this hood to contain under these adverse conditions sets a new standard of safety.

Safety is foremost, but energy savings is equally impressive. Although face velocity is a factor, itís the volumetric rate CFM) that determines the energy consumption. Operating a 6' Protector XStream at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM. Regardless of your desired operating face velocity, the Protector XStream yields the lowest required CFM of any hood.



Only the first 100 items are listed in this category.

More Info Product Name Retail Price Our Price
110410000 - 4' Protector XStream Laboratory Hood
More Info

4' Protector XStream Laboratory Hood

Catalog id : 110410000

LabConco Brand Product 
$8,715.00 $6,972.00
110410002 - 4' Protector XStream Laboratory Hood
More Info

4' Protector XStream Laboratory Hood

Catalog id : 110410002

LabConco Brand Product - with 2 service fixtures and 1 electrical duplex
$9,715.00 $7,772.00
110410020 - 4' Protector XStream Laboratory Hood
More Info

4' Protector XStream Laboratory Hood

Catalog id : 110410020

LabConco Brand Product
$8,715.00 $6,972.00
110410021 - 4' Protector XStream Laboratory Hood
More Info

4' Protector XStream Laboratory Hood

Catalog id : 110410021

LabConco Brand Product - with 2 service fixtures
$9,510.00 $7,608.00
110510000 - 5' Protector XStream Laboratory Hood
More Info

5' Protector XStream Laboratory Hood

Catalog id : 110510000

LabConco Brand Product 
$9,755.00 $7,804.00
110510002 - 5' Protector XStream Laboratory Hood
More Info

5' Protector XStream Laboratory Hood

Catalog id : 110510002

LabConco Brand Product - with 2 service fixtures and 1 electrical duplex
$10,750.00 $8,600.00
110510020 - 5' Protector XStream Laboratory Hood
More Info

5' Protector XStream Laboratory Hood

Catalog id : 110510020

LabConco Brand Product 
$9,755.00 $7,804.00
110510021 - 5' Protector XStream Laboratory Hood
More Info

5' Protector XStream Laboratory Hood

Catalog id : 110510021

LabConco Brand Product - with 2 service fixtures
$10,550.00 $8,440.00
110610000 - 6' Protector XStream Laboratory Hood
More Info

6' Protector XStream Laboratory Hood

Catalog id : 110610000

LabConco Brand Product 
$10,795.00 $8,636.00
110610002 - 6' Protector XStream Laboratory Hood
More Info

6' Protector XStream Laboratory Hood

Catalog id : 110610002

LabConco Brand Product - with 2 service fixtures and 1 electrical duplex
$11,795.00 $9,436.00
110610020 - 6' Protector XStream Laboratory Hood
More Info

6' Protector XStream Laboratory Hood

Catalog id : 110610020

LabConco Brand Product 
$10,795.00 $8,636.00
110610021 - 6' Protector XStream Laboratory Hood
More Info

6' Protector XStream Laboratory Hood

Catalog id : 110610021

LabConco Brand Product - with 2 service fixtures
$11,590.00 $9,272.00
110810000 - 8' Protector XStream Laboratory Hood
More Info

8' Protector XStream Laboratory Hood

Catalog id : 110810000

LabConco Brand Product 
$15,380.00 $12,304.00
110810002 - 8' Protector XStream Laboratory Hood
More Info

8' Protector XStream Laboratory Hood

Catalog id : 110810002

LabConco Brand Product - with 2 service fixtures and 2 electrical duplexes
$16,375.00 $13,100.00
110810020 - 8' Protector XStream Laboratory Hood
More Info

8' Protector XStream Laboratory Hood

Catalog id : 110810020

LabConco Brand Product 
$15,380.00 $12,304.00
110810021 - 8' Protector XStream Laboratory Hood
More Info

8' Protector XStream Laboratory Hood

Catalog id : 110810021

LabConco Brand Product - with 2 service fixtures
$16,170.00 $12,936.00
9410300 - Sash Stop Kit
More Info

Sash Stop Kit

Catalog id : 9410300

LabConco Brand Product
$38.25 $34.42
9419400 - Rear Finish Panel Kit
More Info

Rear Finish Panel Kit

Catalog id : 9419400

LabConco Brand Product - for 4' Protector Benchtop Hood
$420.00 $357.00
9419500 - Rear Finish Panel Kit
More Info

Rear Finish Panel Kit

Catalog id : 9419500

LabConco Brand Product - for 5' Protector Benchtop Hood
$495.00 $420.75
9419600 - Rear Finish Panel Kit
More Info

Rear Finish Panel Kit

Catalog id : 9419600

LabConco Brand Product - for 6' Protector Benchtop Hood
$555.00 $471.75
9419800 - Rear Finish Panel Kit
More Info

Rear Finish Panel Kit

Catalog id : 9419800

LabConco Brand Product - for 8' Protector Benchtop Hood
$840.00 $714.00
9503400 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503400

LabConco Brand Product - 36.0" deep
$1,415.00 $1,132.00
9503401 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503401

LabConco Brand Product - 36.0" deep
$1,545.00 $1,236.00
9503402 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503402

LabConco Brand Product - 36.0" deep
$1,545.00 $1,236.00
9503410 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503410

LabConco Brand Product - 36.0" deep
$1,545.00 $1,236.00
9503411 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503411

LabConco Brand Product - 36.0" deep
$1,680.00 $1,344.00
9503412 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503412

LabConco Brand Product - 36.0" deep
$1,680.00 $1,344.00
9503420 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503420

LabConco Brand Product - 36.0" deep
$1,545.00 $1,236.00
9503421 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503421

LabConco Brand Product - 36.0" deep
$1,680.00 $1,344.00
9503422 - 4' SpillStopper Work Surface
More Info

4' SpillStopper Work Surface

Catalog id : 9503422

LabConco Brand Product - 36.0" deep
$1,680.00 $1,344.00
9503500 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503500

LabConco Brand Product - 36.0" deep
$1,695.00 $1,356.00
9503501 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503501

LabConco Brand Product - 36.0" deep
$1,820.00 $1,456.00
9503502 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503502

LabConco Brand Product - 36.0" deep
$1,820.00 $1,456.00
9503510 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503510

LabConco Brand Product - 36.0" deep
$1,820.00 $1,456.00
9503511 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503511

LabConco Brand Product - 36.0" deep
$1,965.00 $1,572.00
9503512 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503512

LabConco Brand Product - 36.0" deep
$1,965.00 $1,572.00
9503520 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503520

LabConco Brand Product - 36.0" deep
$1,820.00 $1,456.00
9503521 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503521

LabConco Brand Product - 36.0" deep
$1,965.00 $1,572.00
9503522 - 5' SpillStopper Work Surface
More Info

5' SpillStopper Work Surface

Catalog id : 9503522

LabConco Brand Product - 36.0" deep
$1,965.00 $1,572.00
9503600 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503600

LabConco Brand Product - 36.0" deep
$1,980.00 $1,584.00
9503601 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503601

LabConco Brand Product - 36.0" deep
$2,100.00 $1,680.00
9503611 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503611

LabConco Brand Product - 36.0" deep
$2,270.00 $1,816.00
9503612 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503612

LabConco Brand Product - 36.0" deep
$2,270.00 $1,816.00
9503620 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503620

LabConco Brand Product - 36.0" deep
$2,100.00 $1,680.00
9503621 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503621

LabConco Brand Product - 36.0" deep
$2,270.00 $1,816.00
9503622 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503622

LabConco Brand Product - 36.0" deep
$2,270.00 $1,816.00
9503800 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503800

LabConco Brand Product - 36.0" deep
$2,530.00 $2,024.00
9503801 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503801

LabConco Brand Product - 36.0" deep
$2,660.00 $2,128.00
9503802 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503802

LabConco Brand Product - 36.0" deep
$2,660.00 $2,128.00
9503810 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503810

LabConco Brand Product - 36.0" deep
$2,660.00 $2,128.00
9503811 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503811

LabConco Brand Product - 36.0" deep
$2,790.00 $2,232.00
9503812 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503812

LabConco Brand Product - 36.0" deep
$2,790.00 $2,232.00
9503820 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503820

LabConco Brand Product - 36.0" deep
$2,660.00 $2,128.00
9503821 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503821

LabConco Brand Product - 36.0" deep
$2,790.00 $2,232.00
9503822 - 8' SpillStopper Work Surface
More Info

8' SpillStopper Work Surface

Catalog id : 9503822

LabConco Brand Product - 36.0" deep
$2,790.00 $2,232.00
9523400 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  no cutouts for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - no cutouts for Protector XStream Hoods

Catalog id : 9523400

LabConco Brand Product
$1,415.00 $0.00 No
Longer
Available
9523401 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutout -  right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutout - right rear for Protector XStream Hoods

Catalog id : 9523401

LabConco Brand Product
$1,545.00 $0.00 No
Longer
Available
9523402 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutout -  right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutout - right side for Protector XStream Hoods

Catalog id : 9523402

LabConco Brand Product
$1,545.00 $0.00 No
Longer
Available
9523410 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutout -  left rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutout - left rear for Protector XStream Hoods

Catalog id : 9523410

LabConco Brand Product
$1,545.00 $0.00 No
Longer
Available
9523411 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutouts -  left rear and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutouts - left rear and right rear for Protector XStream Hoods

Catalog id : 9523411

LabConco Brand Product
$1,680.00 $0.00 No
Longer
Available
9523412 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutouts -  left rear and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutouts - left rear and right side for Protector XStream Hoods

Catalog id : 9523412

LabConco Brand Product
$1,680.00 $0.00 No
Longer
Available
9523420 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutout -  left side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutout - left side for Protector XStream Hoods

Catalog id : 9523420

LabConco Brand Product
$1,545.00 $0.00 No
Longer
Available
9523421 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutouts -  left side and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutouts - left side and right rear for Protector XStream Hoods

Catalog id : 9523421

LabConco Brand Product
$1,680.00 $0.00 No
Longer
Available
9523422 - SpillStopper Work Surface with flush sill and trough -  4 foot w x 34 inch d -  with cupsink cutouts -  left side and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 4 foot w x 34 inch d - with cupsink cutouts - left side and right side for Protector XStream Hoods

Catalog id : 9523422

LabConco Brand Product
$1,680.00 $0.00 No
Longer
Available
9523500 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  no cutouts for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - no cutouts for Protector XStream Hoods

Catalog id : 9523500

LabConco Brand Product
$1,695.00 $0.00 No
Longer
Available
9523501 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutout -  right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutout - right rear for Protector XStream Hoods

Catalog id : 9523501

LabConco Brand Product
$1,820.00 $0.00 No
Longer
Available
9523502 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutout -  right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutout - right side for Protector XStream Hoods

Catalog id : 9523502

LabConco Brand Product
$1,820.00 $0.00 No
Longer
Available
9523510 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutout -  left rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutout - left rear for Protector XStream Hoods

Catalog id : 9523510

LabConco Brand Product
$1,820.00 $0.00 No
Longer
Available
9523511 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutouts -  left rear and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutouts - left rear and right rear for Protector XStream Hoods

Catalog id : 9523511

LabConco Brand Product
$1,965.00 $0.00 No
Longer
Available
9523512 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutouts -  left rear and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutouts - left rear and right side for Protector XStream Hoods

Catalog id : 9523512

LabConco Brand Product
$1,965.00 $0.00 No
Longer
Available
9523520 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutout -  left side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutout - left side for Protector XStream Hoods

Catalog id : 9523520

LabConco Brand Product
$1,820.00 $0.00 No
Longer
Available
9523521 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutouts -  left side and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutouts - left side and right rear for Protector XStream Hoods

Catalog id : 9523521

LabConco Brand Product
$1,965.00 $0.00 No
Longer
Available
9523522 - SpillStopper Work Surface with flush sill and trough -  5 foot w x 34 inch d -  with cupsink cutouts -  left side and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 5 foot w x 34 inch d - with cupsink cutouts - left side and right side for Protector XStream Hoods

Catalog id : 9523522

LabConco Brand Product
$1,965.00 $0.00 No
Longer
Available
9523600 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  no cutouts for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - no cutouts for Protector XStream Hoods

Catalog id : 9523600

LabConco Brand Product
$1,980.00 $0.00 No
Longer
Available
9523601 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  with cupsink cutout -  right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - with cupsink cutout - right rear for Protector XStream Hoods

Catalog id : 9523601

LabConco Brand Product
$2,100.00 $0.00 No
Longer
Available
9523602 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  with cupsink cutout -  right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - with cupsink cutout - right side for Protector XStream Hoods

Catalog id : 9523602

LabConco Brand Product
$2,100.00 $0.00 No
Longer
Available
9523610 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  with cupsink cutout -  left rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - with cupsink cutout - left rear for Protector XStream Hoods

Catalog id : 9523610

LabConco Brand Product
$2,100.00 $0.00 No
Longer
Available
9523620 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  with cupsink cutout -  left side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - with cupsink cutout - left side for Protector XStream Hoods

Catalog id : 9523620

LabConco Brand Product
$2,100.00 $0.00 No
Longer
Available
9523621 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  with cupsink cutouts -  left side and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - with cupsink cutouts - left side and right rear for Protector XStream Hoods

Catalog id : 9523621

LabConco Brand Product
$2,270.00 $0.00 No
Longer
Available
9523622 - SpillStopper Work Surface with flush sill and trough -  6 foot w x 34 inch d -  with cupsink cutouts -  left side and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 6 foot w x 34 inch d - with cupsink cutouts - left side and right side for Protector XStream Hoods

Catalog id : 9523622

LabConco Brand Product
$2,270.00 $0.00 No
Longer
Available
9523800 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  no cutouts for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - no cutouts for Protector XStream Hoods

Catalog id : 9523800

LabConco Brand Product
$2,530.00 $0.00 No
Longer
Available
9523801 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutout -  right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutout - right rear for Protector XStream Hoods

Catalog id : 9523801

LabConco Brand Product
$2,660.00 $0.00 No
Longer
Available
9523802 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutout -  right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutout - right side for Protector XStream Hoods

Catalog id : 9523802

LabConco Brand Product
$2,660.00 $0.00 No
Longer
Available
9523810 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutout -  left rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutout - left rear for Protector XStream Hoods

Catalog id : 9523810

LabConco Brand Product
$2,660.00 $0.00 No
Longer
Available
9523811 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutouts -  left rear and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutouts - left rear and right rear for Protector XStream Hoods

Catalog id : 9523811

LabConco Brand Product
$2,790.00 $0.00 No
Longer
Available
9523812 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutouts -  left rear and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutouts - left rear and right side for Protector XStream Hoods

Catalog id : 9523812

LabConco Brand Product
$2,790.00 $0.00 No
Longer
Available
9523820 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutout -  left side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutout - left side for Protector XStream Hoods

Catalog id : 9523820

LabConco Brand Product
$2,660.00 $0.00 No
Longer
Available
9523821 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutouts -  left side and right rear for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutouts - left side and right rear for Protector XStream Hoods

Catalog id : 9523821

LabConco Brand Product
$2,790.00 $0.00 No
Longer
Available
9523822 - SpillStopper Work Surface with flush sill and trough -  8 foot w x 34 inch d -  with cupsink cutouts -  left side and right side for Protector XStream Hoods
More Info

SpillStopper Work Surface with flush sill and trough - 8 foot w x 34 inch d - with cupsink cutouts - left side and right side for Protector XStream Hoods

Catalog id : 9523822

LabConco Brand Product
$2,790.00 $0.00 No
Longer
Available
9576910 - Tissue Screen Kit
More Info

Tissue Screen Kit

Catalog id : 9576910

LabConco Brand Product - for 4' XStream
$94.50 $80.33
9576911 - Tissue Screen Kit
More Info

Tissue Screen Kit

Catalog id : 9576911

LabConco Brand Product - for 5' XStream
$105.00 $89.25
9576912 - Tissue Screen Kit
More Info

Tissue Screen Kit

Catalog id : 9576912

LabConco Brand Product - for 6' XStream
$116.00 $98.60
9576913 - Tissue Screen Kit
More Info

Tissue Screen Kit

Catalog id : 9576913

LabConco Brand Product - for 8' XStream
$137.00 $116.45
9725200 - Distillation Grid Kit
More Info

Distillation Grid Kit

Catalog id : 9725200

LabConco Brand Product 
$2,470.00 $2,099.50
9725204 - Distillation Grid Kit
More Info

Distillation Grid Kit

Catalog id : 9725204

LabConco Brand Product 
$1,665.00 $1,415.25
9725205 - Distillation Grid Kit
More Info

Distillation Grid Kit

Catalog id : 9725205

LabConco Brand Product 
$1,980.00 $1,683.00
9725206 - Distillation Grid Kit
More Info

Distillation Grid Kit

Catalog id : 9725206

LabConco Brand Product
$2,360.00 $2,006.00
9503602 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503602

LabConco Brand Product - 36.0" deep
$2,100.00 $1,680.00
9503610 - 6' SpillStopper Work Surface
More Info

6' SpillStopper Work Surface

Catalog id : 9503610

LabConco Brand Product - 36.0" deep
$2,100.00 $1,680.00
Protector XStream Laboratory Hoods

All Images are representative and may or may not be of actual product.

Tags : MILLIPORE ALTERNATIVE | PROTECTOR | XSTREAM | LABORATORY | HOODS

MILLIPORE-ALTERNATIVE.COM content (C)2009-2020 APS Water Services Corporation - All rights reserved
Website Software - Multi-Website Content Manager - Wilson Web Engineering (C)2012-2020

Micro-Website is a trademark of Wilson Web Engineering

protector xstream laboratory hoods
millipore-alternative.com micro-website™
8/6/2020
9:40:04 AM

protector xstream laboratory hoods | millipore-alternative.com
Google Apps

Barnstead Filters and Parts


Other APS Web Properties
Barnstead-Water.com lab-Water-filters.com lab-water System.com LabFilter.com Millipore-alternative.com Durastill Water Distillers Ahlstrom-Filters.com